Header Ads

FAQ

Need 24/7 Game Hosting Service ?

# IGC Online  :  providing game servers at affordable rates

# For more details pls contact  : http://igc.online/pricing_cs-16.php

Port Forwarding Issue ?

If ur Friend's Not connect or Join with ur server Then Follow Following Instruction

You are required to do port forward if you are behind NAT firewall (router or modem), default port number is 27015. 

Here is a general guide how to do that :  https://portforward.com/router.htm

Then you have to send your public IP address to yours friends. You can get your public IP address from  https://www.whatismyip.com/

Help Setting Up a Static IP Address https://portforward.com/networking/staticip.htm

Router Related Issue : http://setuprouter.com/   



Download Counter-Strike Setup



Download HLDS Setup




Common Issues ?




Q: What are HLStats and HLStatsX ?

A : HLStats (For Counter-Strike 1.6 and Condition Zero) and HLStatsX (For Counter-Strike Source, Half-Life 2 Deathmatch, DOD:Source, and
more) are web based stats and are different from in-game stats, which some mods provide. HLStats are maintained on our website


Q : Why can't I find my server in the Steam server browser ?
A : There are thousands of servers listed in the Steam list and sometimes it doesn't list them all when doing a search. The most common mistake
is not setting the correct Region filter. When searching for servers click on "Filter" and select the region that your server is located in. The region
setting is a setting within your server.cfg file (sv_region).
 If you select the correct region, then you should be able to easily find your serverlisted. Possible values for the sv_region variable are below. The most common variable for this is "1." 
If you want your server to be located in a different region, simply change the variable in your server.cfg file and restart your server. Searching in the Steam list with that region Filter
should now being up your server.
// 0=US East coast, 1=US West coast, 2= South America, 3=Europe, 4=Asia, 5=Australia, 6=Middle East, 7=Africa and 255=world.
sv_region 1
If that does not work, try the "Run Steam Update" feature within your control panel. If Steam came out with an update, then your server may
need to be updated to the most current version before it 'll show on the Steam list.


Q : I'm getting a "video mode" or "Direct X" error
A : This does not have to do with the server that you purchased from us. Please seek support for your video card or the game files on your
computer might be corrupt. A common solution to these problems is reinstalling your video card drivers or your game


Q : I want to switch my server to a different location.
A : If you would like to have your server in a different location, open up a Support Ticket and your server will be moved. Your server ip address
will change, but your server configurations will stay the same. There is no fee assocated with this.


Q : How do I add music to my MOTD ?
A : Your motd can be made into an html document. If you have web space, you can refer to your music file in your motd.txt like this:
<head>
<NOEMBED>
<BGSOUND src="http://www.yoursite.com/cstrike/sound.wav">
</NOEMBED>
</h ead>
<html>
Your motd message goes here
</html>


Q : I have my server set up how I like it - how can I backup my configuration?
A : You don't need to backup core files (like srcds.exe, etc) which have no configuration changes. You only need to backup files you have
configured. Simply download those files by clicking on them in the file manager utility within your control panel. You can save them on your
home computer as a backup. If you wish to download many files at once, check the box to the left of the filename and then click the "zip files" at
the top of the file list. You may also download files to your computer quickly via ftp.

Q : I uploaded custom maps to my server, but they are not working.
A : Make sure you downloaded the maps from a trusted online site and you are not simply uploading maps that you have downloaded onto your
computer automatically when joining servers. If you are simply uploading maps that you already have on your computer, then you will not have
all of the needed files on your server for the map to function properly. Please redownload the map and follow the directions that that specific
map came with. If you are getting the message 'missing BSP,'see the section dedicated to that message.

Q : I'm getting the error message "Error verifying STEAM UserID Ticket" and can't connect to servers.
A : You'll need to log out of Steam and back in. This is different from closing Steam and reopening Steam. Make sure you know your steam
username on your account and your password.
1) Right click on your Steam Icon at the bottom right of the taskbar.
2) Click on "Settings."
3) Click "Log in as different user..."
4) You'll be logged out and you'll need to sign back in with your username and password.


Q : How do I use RCON ?
A : You will need to use RCON commands on your server if you do not have a mod (Admin Mod, AMX Mod, Mani-Mod) installed.
You must login to rcon BEFORE the server will accept commands from you.
Assuming the rcon password (set in server.cfg) and included in your account information email for your server is "Password", the syntax to login
to rcon is: (THESE ARE CASE-SENSITIVE and have to be typed in the console window)
rcon_password Password
You may then type commands such as:
rcon changelevel de_dust
http://way2counter-strike.blogspot.in/2014/06/amx-mod-x-182-tutorial-2014-2015.htmlto learn more about RCON commands


Q : How do I enable my console in order to type in Admin Commands ?
A : Start a game in Counter Strike Source.
Press the "Esc" key.
Go to "Options"
Click on the "Keyboard" tab
Click on the "Advanced" button
Check the box next to "Enable Developer Console (~)"
You will now be able to press the "~" button in-game on your keyboard and you will see a window come down inside the game and you will be
able to type your commands there.


Q : How do I change my map cycle ?
A : You will need to follow these instructions.
1)Click on "cstrike\mapcycle.txt"
2)Add all of the maps you want in your map cycle and click Save.
3)Restart your server in CS Admin.


Q : How do I add/upload maps ?
A : You will need to follow these instructions or use your own ftp program.
1)Click on "cstrike"
2)Click on "maps"
3)Click Upload. Upload your .bsp map files here. If the map requires additional files to play, make sure you upload them to the correct directory
or the map will not work and will crash your server if you change it to that map.
4)You will need to add the maps to your map cycle and restart your server before the will appear in your map rotation.
5) If this process does not work for some reason, then you'll need to use ftp to put maps on your server. It's easier and more efficient to use ftp
anyways.


Q : Where can I download custom maps for my server ?
A : http://way2counter-strike.blogspot.in/p/download-cs-16-maps.html. Or search with a search engine to find maps.


Q : Why can't players download custom maps from my server ?
A : There is an option in your server.cfg file on your server that will need to be changed.
1)Click on "cstrike\server.cfg"
2)Change "sv_allowdownload" to equal "1".
sv_allowdownload 1
3)Save the change and restart your server and players will be able to download custom maps.


Q : My server says that it's "Out of Date" and/or "Server Using Different Class Tables" and I can not connect.
A : Frequently Steam comes out with an update and your server will be using the previous version. Steam forces you to upgrade to the newest
version before you can play on your server. Go into CS Admin and click on "Game Servers" and then click on "Run Steam Update." This
should update your server. If this is unsuccessful, then open a Support Ticket


Q : My server isn't responding/is down
A : There are several problems that can occur.
1)Stop your server in CS Admin and then restart it.
2)Within CS Admin Click on "Game Servers" and then click on "Run Steam Update." This will update your server.
3)Check your Command Line Changer in CS Admin and make sure it's set to default. If there is an incorrect setting, your server will not
respond.
4)If you have uploaded a map that is corrupt or doesn't have all of the files necessary to run, your server will not start on that map. Remove
custom maps from your mapcycle.txt and restart your server.
5)If you have changed configurations of your server.cfg file this could cause your server to not respond. You can open a Support Ticket in CS
Admin and we can set your server.cfg back to default.
6)If you are not successful in getting your server to start, please open a support ticket in CS Admin.

Q : My server keeps crashing
A : There are several problems that can occur.
1)Stop your server in CS Admin and then restart it.
2)Within CS Admin Click on "Game Servers" and then click on "Run Steam Update." This will update your server.
3)If you have uploaded a map that is corrupt or doesn't have all of the files necessary to run, your server will not start on that map and will crash.
Remove custom maps from your mapcycle.txt and restart your server.
4)If you have changed configurations of your server.cfg file this could cause your server to crash. You can open a Support Ticket in CS Admin
and we can set your server.cfg back to default.
5)If you are not successful in getting your server to stop crashing, please open a support ticket in CS Admin.

Q : My server keeps lagging
A : There are several problems that can occur.
1)Stop your server in CS Admin and then restart it.
2)Within CS Admin Click on "Game Servers" and then click on "Run Steam Update." This will update your server.
3)If you have uploaded a map that is corrupt or doesn't have all of the files necessary to run, your server will not start on that map and will crash.
Remove custom maps from your mapcycle.txt and restart your server.
4)If you have changed configurations of your server.cfg file this could cause your server to lag. Changing your voice codex can cause sever
server problems. You can open a Support Ticket in CS Admin and we can set your server.cfg back to default.


Q : Everyone has a high ping
A : There are several problems that can occur.
1)Stop your server in CS Admin and then restart it.
2)Within CS Admin Click on "Game Servers" and then click on "Run Steam Update." This will update your server.
3)If you have changed configurations of your server.cfg file this could cause your server to lag and cause high ping times. Changing your voice
codex can cause sever server problems. You can open a Support Ticket in CS Admin and we can set your server.cfg back to default.
4)If you are not successful in getting your ping times to drop, please open a support ticket in CS Admin.


Q : How do I enable fast map downloads ?
A:
1) You need to have dedicated web space to allow users to download maps from (Purchased from Counter-Strike.com or any other web hosting
provider).
2) Add the following variable to your server.cfg file (replace with your web address)
sv_downloadurl "http://yourdomain.com/cstrike/"
At this location you need to create a directory structure to reflect what your counter-strike server directories and files look like (every file needed
for the specific maps).
Place your maps at this location: http://yourdomain.com/cstrike/maps/
Any other files that are needed for the maps should be included in the respective directories as well.
Basically what you are doing here is creating a directory structure that is identical to your actual game server, except these directories will be
located at a web address. You are then pointing your users to this location (by defining it in the server.cfg) to download maps. Many maps have
sounds files, etc, so all of the related files must be put into the directories they are meant to be in. It is very important that you include the .res
file with your map. This file tells the user what files they need to download (.bsp file, .wav file in /sounds, etc.)


Q : How do I edit my MOTD file ? 
A : To edit your motd.txt just follow the instructions below
1)Click on "/cstrike/motd.txt"
2)You can delete everything in this file and simply write what you want in a text format or if you know HTML you can write what you want
your motd to look like in HTML.
3) Save the file and restart your server.


Q : How do I change the name of my server ?
1) Click on "/csetrike/server.cfg file.
2) Change the line that says the following to whatever you want the name of your server to be, save the file, and then restart your server.
hostname "put ur server name"


Q : How do I turn on/off Gun Game?
A : You can turn on/off Gun Game with the following commands, if you have already installed Gun Game.
ma_rcon es_load gungame3
ma_rcon es_unload gungame3

Q : How do I turn on/off Deathmatch Mod ?
A: You can turn on/off Gun Game with the following commands, if you have already installed Deathmatch Mod (the standalone mod not
through Eventscripts/Gun Game).
ma_rcon cssdm_enable OR ma_rcon cssdm_disable


Q : How do I install Sourcemod ?
A : Click on the "Game Mods" icon that is located in your game server control panel, select "SourceMod" from the drop down menu, and click
"Install".

Q : How do I add admins to SourceMod ?
A : Follow the steps below to add an admin to SourceMod:
1) Click on the "Default Config Files" icon that is located in your game server control panel
2) Click on the file labeled "simple_admins.ini"
3) Place your Steam ID on a blank line at the bottom of this file like so: "STEAM_0:1:123456" "99:z"
4) Click the "Save" button that is located at the bottom of the page
5) Restart your server for the changes to take effect
This will give the individual who owns this steam ID full admin access on the server. Instructions on other methods used to add admins and
restrictions can also be found at the top of this file.

Q : How do I bring up SourceMod's admin menu ?
A : You can bring the admin menu up by typing the "sm_admin" command into your console. This will only work if you have assigned your
Steam ID as an admin in your simple_admins.ini file.
You can also bind the admin menu to hotkey to bring it up much easier. To do this, type the following command into your console: bind o
sm_admin
This will bind the admin menu to the letter o on your keyboard. You can bind the "sm_admin" command to a different key if you wish. Simply
change the letter o from the example to the desired keyboard character.


Q : How do I remove SourceMod ?
A : Simply follow these steps to remove SourceMod from your server:
1) Click on the "File Manager" icon that is located in your game server control panel
2) Navigate to your server's /addons/metamod folder
3) Delete the file labeled "sourcemod.vdf"
4) Finally, restart your server for the change to take effect and SourceMod will no longer be running on your game server.

Q : How do I edit the SourceMod advertisements ?
A : Navigate to the /addons/sourcemod/configs folder that is located within your game server's main directory via the File Manager in your game
server control panel. Next, locate the file labeled "advertisements.txt", click on the drop-down box to the right of it, and select "Edit". Now edit
the listing of advertisements so that they match your desires. Click "Save" at the bottom of the page once you are done with your changes and
restart your server for the changes to take effect.


Q : How do I find my Steam ID ?
A : To find your Steam ID you must be in a game of Counter-Strike.
1) Press the "~" key on your keyboard to bring down your console window.
2) In the console window type "status"
3) You will see your Steam ID next to your name.
4) Your Steam ID will have the following format: STEAM_0:0:123456


Q : How do I restrict weapons ?
cstrike\addons\amxmodx\configs
; Generated by Restrict Weapons Plugin. Do not modify!
; value name
g3sg1            ; H&K G3/SG-1 Sniper Rifle
sg550            ; Sig SG-550 Sniper
nvgs             ; NightVision Goggles
shield           ; Tactical Shield

 

Q : For ban any user type in console or cstrike-listip cgf file type following
addip 0 10.10.10.10
============================================================
for remove ban user type
amx_unban 10.10.10.10
or
removeip 10.10.10.10


Q : Why wont mp_startmoney change ?
A : In order to change mp_startmoney to anything other than the default 800 value, you have to turn off dunamic pricing by changing it to the
value below in your server.cfg file.
mp_dynamicpricing 0


Q : How do I change my RCON password ?
1)Click on edit next to your server.cfg file.
2) Change the rcon password usually near the top of your file (in this case the password is pass123, save the file, and then restart your server.
rcon_password "pass123"
Copyright © WAY2CS®[2014-2017] . Website is developed by draghu007 aka @@Bad_Man@@™. Powered by Blogger.